Geemarc Ampli250 Скачать руководство пользователя страница 30

30

Part 68 of FCC rules information
- This equipment complies with Part 68 of the FCC rules and the require-
ments adopted by the ACTA. On the bottom of this equipment is a label that 
contains, among other information, a product identi

fi

er in the format US:

AAAEQ##TXXXX.
If requested, this number must be provided to the telephone company.
- All applicable certi

fi

cation jacks Universal Service Order Codes (USOC) 

for the equipment is provided (i.e. RJ11C) in the package with each piece 
of approved terminal equipment.
- A plug and jack used to connect this equipment to the premises wiring 
and telephone network must comply with the applicable FCC Part 68 rules 
and requirement adopted by the ACTA. A compliant telephone cord and 
modular plug is provided with this product. It is designed to be connected 
to a compatible modular jack that is also compliant. See installation instruc-
tions for details.
- The REN is used to determine the number of devices that may be con-
nected to the telephone line. Excessive RENs on a telephone line may 
result in the devices not ringing in response to an incoming call. In most but 
not all areas, the sum of RENs should not exceed 

fi

ve (5.00). To be certain 

of the number of devices that may be connected to a line, as determined 
by the total RENs, contact the local telephone company. For products ap-
proved after July 23, 2001, the REN for this product is part of the product 
identi

fi

er that has the format US:AAAEQ##TXXXX.

The digits represented by ## are the REN without a decimal point (e.g., 03 
is a REN of 0.3).
For earlier products, the REN is separately shown on the label.
- If this equipment causes harm to the telephone network, the telephone 
company will notify you in advance that temporary discontinuance of ser-
vice may be required. But if advance notice isn’t practical, the telephone 
company will notify the customer as soon as possible. Also, you will be 
advised of your rights to 

fi

le a complaint with the FCC if you believe it is 

necessary.
- The telephone company may make changes in its facilities, equipment, 
operation or procedures that could affect the operation of the equipment. If 
this happens the telephone company will provide advance notice in order for 

REGULATORY COMPLIANCE

Содержание Ampli250

































Отзывы: