9
INSTALL THE HOOD
Note: At least two people will be required to mount the hood.
1. Raise the hood into its mounting position.
2. Align the rectangular opening on the back of the hood
with the wall-mounting bracket. Gently lower the hood
until it securely engages the bracket.
3. Open the Al. filter and find the two
φ
8 mm holes on
the back of the hood. Level the hood with 2 mounting
screws (ST4*30mm) with washer. Use drywall
anchors provided.
4. Measure the height of the glass to the slider duct fixing
support. Adjust the height of the chimney according to
the height. Then use the duct fixing support with two
screws (4x8mm) to fix the chimneys. Shown as in the
picture.
5. Put the chimney on the hood, use two screws (4x8mm)
to fix the chimney to the slider duct fixing support.
6. Use the other two screws (4x8mm) to fix the bottom of chimney.
7. After adjusting the position, open the filter and
fix the body inside with safety screws.
4x8mm
Screw
Screw
4x8mm
Safely Screw
Safely Screw