A full map must be created before this function can be used.
After cleaning starts, the robot may move beyond the defined
areas. Make sure there are no obstacles preventing the robot’s
access to the target rooms.
1.
2.
Dry vacuum module can be used on either smooth or carpeted surface.
Remove / secure all loose floor mats / rugs in the area being vacuumed.
Vacuum robot is designed to move across surface between 0 mm to 15 mm.
1.
2.
H
ow
T
o U
se
14
C. Zone Cleaning (Only App operation support )
Use the app to draw a specific zone for the robot to
clean. Then, the robot will only clean the designated
zone. After cleaning, the robot will return to the
charging dock automatically.
D. Selective Room Cleaning
(Only App operation support )
Select specific rooms for cleaning in the app. In this
mode, the robot will only clean the selected rooms.
After cleaning, the robot will return to the charging
dock automatically.
√A
√B
C
D
E. Virtual Wall (Only App operation support )
press virtual wall in APP to draw the virtual wall line.
You can use virtual wall to isolate the areas that do
not want to be cleaned.
NOTE:
NOTE:
