GEDA Battery Ladder Lift, Сборка и инструкция по эксплуатации

Страница: 91 / 124

Maintenance – Checking – Cleaning
BL164 GB Edition 07/2017 91 / 124 Assembly and instruction manual
9.2 Maintenance schedule
The inspections to be carried out on a daily basis before the start of
operation are not included in the maintenance schedule. These are
described in Chapter 7.2.1 because these checks are carried out by the
operating personnel.
The following inspections always include a check for proper function,
wear, completeness and that there is no manipulation present.
Abbreviations used in the maintenance schedule
W = Week / M = Month / Y = Year

= Visual check / ■ = Check W 1M 3M 1Y
Electrical components
Function test of hand-held transmitter or
smartphone application
■
Switching mechanism and limit switch ■
Mechanical components
Webbing
damage / wear)
■
LIFTLadders
(cracks / warping / deformation
and wear)
■
Ladder connectors
(cracks / warping /
deformation / bolt locks)
■
Track rollers / roller guide ■
Slack rope switch
(check for ease of movement; oil if necessary)
■
All covers available

Motor brake ■
Grease escaping / anomalies at gear box

Platform ■
Information signs
(present / legible)

Charger
Check the power cable for damage

Switching mechanism and limit switch ■
Safety of electrical equipment [repeat test]
(insulation measurement…)
■
1
■
1
= The measuring procedures and inspection intervals for the repetition test are to
be carried out in accordance with the installation local and national regulations.
WARNING
Supplement the maintenance plan with details regarding
maintenance/ servicing/ operating equipment/ replacement/ repair in
the instructions of the component parts.