GECMA EXPLORER 15i, Руководство по эксплуатации

Страница: 4 / 42

Manual Explorer 15i 18i 2nd rev2.2 en Gecma Components electronic GmbH
GEC17500221 csckerpen@eaton.com
+49 2273 9812 0 4
Notes
Various drivers e.g. for the graphic card or I/O interfaces can be download at
http://emea.kontron.com/products/computeronmodules/etx/etxdc.html
for different operating systems. Please select “ DOWNLOADS ”
The touch screen option requires the operating system has to support USB-devices.
Drivers can be downloaded at
http://210.64.17.162/web20/eg/Touch_Drives.html
for each of the different operating systems.
The RS232, RS422, RS485 Ex e interfaces require the operating system to support USB-devices.
Drivers can be download at
http://www.ftdichip.com/Drivers/VCP.htm (FT232B device) for each
of the different operating systems. The RS485/422 is implemented by an internal conversion of
the RS232 -Interface.
Depending on how the Explorer is installed the max. ambient temperature for the complete
unit may be reduced when mounted in an additional housing.
To minimize external thermal load we recommend an all day shadowing of the
device/complete unit at direct solar radiation.
Pay attention to heat dissipation when choosing housings and the location of the installation.
The typical/maximum power consumption are 75W/120W -> 260BTU/410BTU.
Extremely low ambient temperatures can affect the display and cause it to darken slightly.
High temperatures could affect the life time of the display.
The user is solely responsible for data storage security, backup and liability for any loss of data.
The exact type of delivered device (e.g. 100-240V AC or 24V DC) you can indicate via the
nameplate and the Test Report.
To ensure correct function of integrated brightness regulator the contacts X45-1 and X45-2
must be bridged. When used a external brightness regulator or brightness sensor they have to
be connected to X45-1 and X45-2 instead of the bridge.
X45-1 and X45-2 must be wired every time.