Geckoplex EP-5, Руководство пользователя

Страница: 15 / 16

Troubleshooting
Issue Solution
Unit does not power on
●
Ensure that the power supply has center
negative polarity and can supply at least
300mA of current at 9-12V.
●
Check that the outlet or power strip that
the supply is plugged into is live.
●
Try a second power supply to ensure that
the first is not faulty.
Presets do not set the delay
time as expected when
activated
Ensure that the tap tempo is disabled. An
active tap-tempo will always override the
preset delay setting.
No effects are heard at the
output, only the instrument
sound.
●
Ensure that the unit is enabled and that
the light is on above the
ON switch. No
effects are heard while disabled.
●
Ensure the output cable is plugged into
the
OUT WET jack. If the OUT DRY jack
is used instead only the dry signal with no
effects added will be heard.
No output sound
●
Ensure that the output cable Is fully
plugged into one of the
OUT jacks.
●
Ensure that the GAIN knob is turned up
high enough to provide useful volume.
●
Ensure that there is not a wiring problem
with signal coming from the instrument or
other upstream equipment.
●
Ensure that all other downstream
equipment and amps are turned on and
functioning correctly.
Loop playback is not heard
in Sound on Sound mode
If an expression pedal is connected, it may
be controlling the loop playback volume.
Ensure that the expression pedal is not
muting the loop.
User becomes speechless
or enters an unresponsive
state of amazement
Sit down, maybe grab a cold beverage, and
focus on breathing as the full magnificence
of the Geckoplex settles in.
Also, congratulate yourself for reading all
the way to the end of this manual.
15