6
Lock
icon
Temperature
unit
Programming Mode
icon
Filter Cycle
icon
Heater
icon
Economy Mode
icon
Up & Down
arrows
Step
Programming
Sequence
Step 1
Step 2
Step 3
Step 4
Time of day
Filter cycle start time
Filter cycle duration
Temperature unit
Summary of control panel parameters
FSxx
Filter cycle start time
Fdxx
Filter cycle duration
P xx
Purge cycles
Tu X
Temperature unit
LocX
Control pad lockout
Step 5
Keypad lockout
Step 6
Storing settings in memory
& returning to Normal mode
Setting the time:
1- Enter Programming mode by holding
Prog.
key pressed down for 2 seconds.
2- The display will show the current setting.
3- Use
Up
and
Down
arrows to change
setting.
11:43
pm
10:25
am
The system automatically performs two filter cycles per day, at
12-hour intervals. During filter cycle, Pump 2 and blower run
for one minute. Pump 1 will then run at low speed for a pro-
grammed number of hours. The "Filter Cycle" icon lights up
when a filter cycle is on.
To program a filter cycle, you must enter: 1) the time you want
the cycle to start and 2) the duration of the cycle. If no filtering is
required, the duration should be set to "0". For continuous
filtering, the filter cycle duration should be set to "12:00".
Setting filter cycle start time:
1- Press
Prog.
key a second time.
2- The display will show
FSxx
, with "xx"
representing the starting hour.
3- Use
Up
and
Down
arrows to change
setting.
Setting filter cycle duration:
1- Press
Prog.
key a third time.
2- The display will show
Fdxx
, with "xx"
representing the duration in hours.
3- Use
Up
and
Down
arrows to change
setting.
Steps 2 & 3- Filter cycle start time & duration
FS12
FS01
Fd12
Fd00
Water temperature can be displayed in either Fahrenheit (˚F)
or Celsius (˚C).
To display the temperature unit:
1- Press
Prog.
key a fourth time.
2- The display will show
TU X
, with "X"
for either ˚F or ˚C.
3- Use
Up
and
Down
arrows to change
setting.
Step 4- Temperature unit
TU F
TU C
To lock or unlock keypad:
1- Press
Prog.
key a fifth time.
2- The display will show "ULoc".
3- Use
Up
and
Down
arrows to change
setting.
Step 5- Keypad lockout
Loc
ULoc
Step 6- Storing settings in memory
Press
Prog.
key a sixth time to store settings in the system's
non-volatile memory and to return to normal mode.
Temperature unit (K-4-10K & 8K)
Press and hold
Light
key for 5 seconds to toggle between
˚F and ˚C.
Inverted display (K-4-10K)
Press and hold
Filter
key for 5 seconds to invert the display.
If a power-up occurs, the display always returns to default
mode.
Purge cycles (K-4-10K)
During a purge cycle, pumps and blower run for two minutes
and "Filter Cycle" icon lights up.
Setting purge cycles:
1- Press
Filter
key.
2- The display will show
P xx
,
with "xx"
representing the currently set number of
daily purge cycles.
3- Use
Up
and
Down
arrows to change setting.
4- Press
Filter
key to store settings.
Step 1- Time of day (K-4-8K for Steps 1 to 6)
This function allows you to prevent unauthorized parameter
setting of the unit. This feature is especially helpful when
young children have access to the keypad.
There are two modes you can choose from:
Full
lock or
Partial
lock.
Full
lock means that all keypad functions are
locked.
Partial
lock means that the basic functions of the spa
will remain accessible (pumps, blower and light), but it will be
impossible to change the temperature Set Point, to override
the Economy mode or to enter the Programming mode.
When control pad is locked, the "Lock" icon will be displayed.
Locking your digital control pad:
1- Press and hold
Pump 1
key for
5 seconds.
2- The display will show
LocP
, with "P"
representing
Partial
lock.
3- Release key and keypad will be in
Partial
lock mode. Keep key pressed
down for 5 more seconds if you want
to be in
Full
lock mode. The "LocF"
message will then be displayed.
When control pad is locked, all automatic functions of the
system run as usual. If a key is pressed down, a "LocP" or
"LocF" message will be displayed for 1 sec. To unlock the
keypad, simply press and hold
Pump 1
key again for 5 sec.
LocP
LocF
Digital control pad lockout (K-4-10K & 8K)
Press
Econo
key (or
Mode
key for K-4-8K keypad) to switch
from Normal mode to Economy mode. To save energy, the
Economy mode Set Point is 20˚F (11˚C) below the Normal
mode Set Point. The display toggles between the "Econ"
message and the current temperature.
The "Economy Mode" icon lights up when Economy
mode is on.
Economy mode (K-4-10K & 8K)
P 24
P 20
• E
Q U
I P P
E D W I
T H G E C K O ' S E X C L
U S I V
E •
Smart
Winter
Mode
TM
9919-100777
3-85-7087-B
