MAKING CONNECTIONS
MAKING CONNECTIONS
To connect the GECKO® REVELATION SR 615RF to your sound system, refer to the following steps:
1. Turn OFF all equipment before making any connections.
2. Mount the GECKO® REVELATION SR 615RF on a stand, wall bracket, fly rigging system,
rigged/suspended clusters/arrays system, and/or on any customized mounting/rigging system
according to the given setup/installation instructions and safety guidelines (optional accessories are
sold separately).
3. For purest of sound, make connections using only quality audio cables (i.e. GECKO® TRUTH T2,
GECKO® TRUTH T3AL), connectors (i.e. GECKO® OLYMPIAN connectors), amplifiers (i.e.
GECKO® GENESIS amplifiers), and mixing consoles (i.e. GECKO® EXODUS mixing consoles)
according to your requirements.
4. Turn ON all equipment after making connections.
INSTALLATION CONSIDERATIONS
INSTALLATION CONSIDERATIONS
HOOKUPS AND CABLING
The GECKO® REVELATION SR 615RF is designed with 8Ω impedance. The two 4-pole SPEAKON®
connectors at the back are wired in parallel and function as both OUTPUT and INPUT connectors. Either one
of these connectors can be used to hookup to another GECKO® REVELATION SR 615RF when necessary.
INPUT AND OUTPUT CABLE CONFIGURATIONS
The following diagram illustrates the polarities and connections of the GECKO® REVELATION SR 615RF.
______________________________________________________________________________________
4
4
© GECKO MUSIC GROUP. All Rights Reserved.
Rear view
Side view
GECKO® TRUTH T2
Professional Speaker Cable
GECKO® OLYMPIAN SPK 404 Pro 4-Pole SPEAKON®
Connector
+
-
