CONNECTING AND DISCONNECTING THE MICROPHONE
CONNECTING AND DISCONNECTING THE MICROPHONE
1. Insert the provided microphone cable with GECKO® Secured Connection™ XLR (female) connector
end into the microphone as shown above. If necessary, rotate the connector to align the key on the
connector and the groove in the microphone. Push the connector into the microphone and secure
the connection by turning the bezel clockwise until it is tight.
NOTES:
The integral XLR (male) output connector on the microphone takes in
standard size XLR (female) connector. If you need a longer cable length other than
the one provided, you may use either a third party longer cable (without GECKO®
Secured Connection™) or connect the XLR (female) end of the provided cable to
another GECKO® TRUTH T3 audiophile microphone cable of your desired length for
best performance.
2. If you are connecting to a balanced audio device, be sure to use balanced configuration on the XLR
and TRS type connectors. Pin 1 (Shield) = Ground, Pin 2 (Tip) = Positive (Hot), Pin 3 (Ring) =
Negative (Cold). If you are connecting to an unbalanced audio device, make sure you bridge Pin 1
and Pin 3 on the connectors.
3. To unplug the connector from the microphone, turn the bezel anti-clockwise all the way until it is off
from the microphone before pulling the connector out.
______________________________________________________________________________________
5
5
© GECKO MUSIC GROUP. All Rights Reserved.
Groove
Key
Bezel
