Information between ( ) indicates which connector/tab to use. See drawing from Step 1 for connector position.
Configuration selection chart
Standard
config. #
Pump 1
Pump 2
Circ. Pump (CP)
configuration
Ozone (O3)
configuration
Filter cycle daily
Heater
1
2SP
(K7-P, K6-P)
10A-3A
_
_
_
2 * 1 hour
with P1
Pump 1
2
1SP
(K7-P)
4A
_
_
During filter cycle, with P1
(K6-P)
2 * 1 hour
with P1
Pump 1
3
1SP
(K7-P)
4A
1SP
(K6-P)
8A
_
_
2 * 1 hour
with P1
Pump 1
4
1SP
(K7-P)
10A
_
During filter cycle
(K6-P)
1A
_
2 * 6 hour
with CP
CP
5
2SP
(K7-P, K6-P)
10A-3A
_
Always on
(P-25)
1
1A
_
2 * day purge
CP
6
1SP
(K7-P)
10A
1SP
(K6-P)
8A
Always on
(P-25)
1
1A
_
2 * day purge
CP
7
1SP
(K7-P)
10A
_
Always on
(P-25)
1
1A
Always on, with CP
(K6-P)
2 * day purge
CP
Software #435, rev. 001
Note
1
:
Circulation pump is not controled via a relay and will run 24/7. Circulation pumps must provide at least 68,1 L/min (18 GPM) without creating kinetic heating of the water
(Gecko recommends using the Aqua-Flo Circ-Master - 1/15 HP).
For complete TechBook or more information, see our website: www.geckoalliance.com
9919-101599-A
Rev. 01-2019
www.geckoalliance.com
© Groupe Gecko Alliance Inc., 2019
All trademarks or registered trademarks are the property of their respective owners.
Glossary
X
Installed
1SP
High speed only
2SP
High and low speed
10A, 10A-3A
Output current: single speed (1SP) or dual speed High-Low (2SP)
