Gecko in.mix 300 Series, Техническое руководство

Страница: 10 / 20

9
Preparation
Connections
Remove the cover screws from the front of the apparatus with a Phillips screw driver
Before closing, please make sure the in.mix 300 gasket is well in place.
To prevent electric shock hazard, do not connect to main power supply while the cover is removed.
Pin Function
1 BLUE (switched ground)
2 GREEN (switched ground)
3 RED (switched ground)
4 V
cc
The inmix 300 powers the LEDs with DC current**
No matter the quantity of LEDs or their placement
(Out 1 to Out 4), a maximum of 16A can be supplied
by the inmix 300 Every color (red, green or blue) is
1 1 1 2 2 2 3 3 3 4 4 4
controlled independently through switching The current
limiting resistors
are not supplied
, they must therefore be
in the LEDs One must not connect a LED (or other light)
directly to any zone
Connectors Out 2, Out 3 and Out 4 offer the following connections The switching transistors are on the inmix 300
Remove all seals and insert LED wire Repeat for every LED lights you need to connect
Gasket
Connector Out 1 offers the following connections For this output, the switching transistors are included with the LEDs,
which is standard with “cluster” type models
Pin Function
1 BLUE (TTL output, High=on)
2 GREEN (TTL output, High=on)
3 RED (TTL output, High = on)
4 +12V
5 OV
1 2 3 4 5
** The output voltage is switched to simulate the power of a
5V output.