25
1
+
Swim functions
This menu is available only if the Swim option is activated
in the spa configuration�
The
Duration
of all training drills and the
Intensity
of all
pre-set training drills are set in this page� The number
of available intensities depends on the swim spa
configuration and on the selected training drill, whose
name is displayed at the top of the screen� The intensity of
personalized drills is set during the drill creation and can
be edited from the Training Drills selection page�
From this page, you can also access the following:
• Training Drills selection
•
Swim Settings
To select an item, slide the right wheel until the desired
icon is highlighted in the middle�
When ready, press
Start
to begin the workout session�
Resume
and
Stop
buttons are also available when a swim
session was previously paused�
Swim settings
In the
Swim settings
page, you can access the following
parameters:
• Warm up
• Cooldown
• Step Time
• Preparation Time
• Light (requires an in.mix installed)
Keypad functions
Warm up & Cooldown
These pages allow you to adjust the duration and intensity
of the warm up and cooldown portion of your training drill�
If no
Warm up
or
Cooldown
sessions are desired, set their
respective duration to 0 minute�
Note that Warm up and Cooldown settings apply to all
training drills�
