EFX ON SWITCH
Switches the internal effect ON or OFF. The internal effect is applied only if this switch is turned ON (pressed
in, switch lights up in amber).
PFL SWITCH
Set this switch ON (pressed in) if you wish to output the effect signal to the PFL bus.The switch lights up
(amber) in the ON mode.
GROUP 1-2 / GROUP 3-4 SWITCHES
Set one or both switches ON (pressed in) to output the internal effect signal to the GROUP 1-2 and/or
GROUP 3-4 buses.
EFFECT RTN FADER
Adjusts the signal level from the internal digital effects unit to the STEREO bus.
REAR PANEL
27. CHANNEL INPUTS
MIC INPUT CONNECTORS
These are balanced XLR (female) type input connectors.
LINE INPUT CONNECTORS
These are balanced phone-type (¼” TRS) input connectors. You can connect either balanced or unbalanced
phone-type plugs to these connectors.
NOTES:
Where an input channel provides both a MIC connector and a LINE
connector, you may use either one of these connectors but you must not use both at
the same time. Please connect to only one of these connectors on each channel.
______________________________________________________________________________________
8
8
© GECKO MUSIC GROUP. All Rights Reserved.
27
28
I
O
30
29
31
38
37
32
33
34
35 36
