Gecko 0608-521033, Техническое руководство

Страница: 14 / 19

13
Heat Mode Operations
4- BOTH (Both systems all at once)
Use this mode for swim spas or large spas, which have bigger needs of energy to keep the water temperature at the
desired set point
The spa control system will always use the external heating system AND the internal heater simultaneously to regulate
the water temperature; they are both activated or deactivated at the same time
*This mode can be set with your intouch 2 app on a mobile device without the need to open the spa skirt to change the
jumper setting on the ingrid
5- SMART (Energy savings)
Use this mode for a better energy saving purpose, combined with a maximum water temperature regulation efficiency
The spa control system will always use the external heating system to regulate the water temperature If the temperature
falls too far below your set point (-25°F), the internal heater will be activated to help your external heating system reach
the set point
Once the temperature is within 15°F from set point, the internal heater is deactivated and the external heating system
takes all control of the water regulation again
*This mode can be set with your intouch 2 app on a mobile device without the need to open the spa skirt to change the
jumper setting on the ingrid