Gebesa ASCEND Скачать руководство пользователя страница 4

Страница: 4 / 4

CHANGING INCHES TO CENTIMETERS (some models)

Press and hold the button number 2 (about 5 seconds) while the LED display flashes “RST” and

then switches to either:

10.3 = cm

10.4 = inches

Release the button number 2. Press and hold the button number 2 again until the desired setting

is reached. Once the chosen setting is displayed, release the button and wait about 5 seconds for

the display to return to “RST”.

Finish the reset process by pressing and holding the DOWN button until the desk lowers, slightly

rises and stops, release the button.

The new measurement setting is set, and your desk is now ready to use.

Press the DOWN button on the Handset until the base reaches its lowest position. Press and hold the

DOWN button again until the LED display reads “RST”.

Press and hold the UP button (about 5 seconds) while the LED flashes “RST” and then switches to either:

10.5 = 10 kg. Pressure (most sensitive)

10.6 = 15 kg. Pressure (middle setting)

10.7 = 20 kg. Pressure (least sensitive)

Release the UP button. Press and hold the UP button again until the desired setting is reached. Once the

chosen setting is displayed, release the button and wait about 5 seconds for the display to return

to “RST”.

Finish the reset process by pressing and holding the DOWN button until the desk lowers a little bit more,

slightly rises, and stops. Release the button. The new anti-collision sensitivity is saved and your desk is

now ready to use.

ASCEND

TROUBLESHOOTING

CHANGING ANTI-COLLISION SENSITIVITY (some models)

Содержание ASCEND

Страница 1: ...e desk will move to the programmed height see caution box above TROUBLESHOOTING If your desk is not functioning properly it may need to be reset Follow the RESET procedure outlined in the USE section...

Страница 2: ...esk lowers a little bit more slightly rises and stops release the button The new starting height value is saved and your desk is now ready to use Note the LED display has a 0 1 tolerance ASCEND TROUBL...

Страница 3: ...he M button and release then press the DOWN button and release The LED display will flash S Press and hold the M button about 2 seconds until the LED display changes to 000 The display will automatica...

Страница 4: ...dset until the base reaches its lowest position Press and hold the DOWN button again until the LED display reads RST Press and hold the UP button about 5 seconds while the LED flashes RST and then swi...