Geberit 616.211.00.1, Руководство по обслуживанию

Страница: 23 / 112

EN
6
Note the new flow limiter value on the
control unit sticker with a ballpoint pen.
*HEHULW6HW$SS
DSSJHEHULWFRP
VHWDSS
OPLQ OPLQ
7
Mount the solenoid valves. → See 4 ,
page 107.
8
Mount the control unit and check that the
solenoid valves function correctly. → See
5 , page 108.
9
Mount the cover plate. → See 6 , page 109.
Repair
Replacing the control unit
Before removing the control unit, read out
the flushing parameters using the Geberit
SetApp.
1
Demount the cover plate. → See 1 ,
page 105.
2
Demount the control unit. → See 2 ,
page 105.
3
Mount the new control unit (art. no.
243.069.00.1) and check that the solenoid
valves function correctly. → See
5 ,
page 108.
4
Put the Geberit sanitary flush into operation.
→ See "Putting the Geberit sanitary flush
into operation after repair", page 24.
5
Mount the cover plate. → See 6 , page 109.
Replacing volumetric flow rate
sensors or solenoid valves
1
Demount the cover plate. → See 1 ,
page 105.
2
Demount the control unit. → See 2 ,
page 105.
3
Demount the solenoid valves. → See 3 ,
page 106.
4
Mount the new volumetric flow rate sensors
(art. no. 616.207.00.1) or new solenoid
valves (art. no. 243.065.00.1). → See
4 ,
page 107.
5
Mount the control unit and check that the
solenoid valves function correctly. → See
5 , page 108.
6
Mount the cover plate. → See 6 , page 109.
45035999171656331-1 © 06-2019
966.709.00.0(03)
23