GeBE E + F GmbH • www.gebe.net • GeBE Doc.No.: SMAN-E-657-V1.4 Thermal Printer GPT-4672/4673
Opening the mechanism allows access to position
mark sensor (see chapter 10.3).
For adjusting the paper width, loosen screw (11) and
set adjuster to designated position. Please consider
not to jam the paper.
3.5 Position mark sensor
Detection of paper with position marks.
3.3 Adjuster for paper width
Adjuster for using paper of different widths 51-61 mm
(GPT-4672) and 60-82 mm (GPT-4673).
3.4 Near Paper End Sensor (optional)
The optical sensor will be screws sideways at the paper
roll holder. Detectable distance to the paper roll is in a
range of 0.5 to 1.0 mm. Two different installation positi-
ons (a+b) are available.
The sensor is plugged on the board.
GPT-4672
GPT-4673
6157M06-R JST-S03-B-XH-A
Pin assignment:
1 Vcc NPE1
1 GND
2 Vcc NPE2
2 Signal NPE
3 Signal NPE1
3 Vcc
4 Signal NPE2
5 GND
6 GND
see also chapter 3, sideways connections
a)
b)
6
3.1 Options
• Anti Jam Unit (in preparation)
• Paper roll holder
• Paper catch
• NPE near paper end sensor
3.2 Paper holder
The printer GPT-4672/4673 can optionally be delivered
with a paper holder.
11
Layout and functions
6
