4
Assembly
Attaching the Side Handle
□
Position the side handle (A) on the holes in the right
of cabinet.
□
Attach handle (A) with 6 screws (AA) and tighten
with supplied hex key. Be careful not to over tighten.
Note: The holes in the cabinet are tapped and do not
require nuts.
Installing the Cord Storage
Brackets
□
Attach the brackets (B) to the back of the cabinet
with two screws (BB) per bracket.
□
Orient the brackets (B) with one pointed up and
one pointed down so that the power outlet cord can be
wrapped around the brackets (B) for storage.
Installing the Heavy Duty
Storage Hooks
□
Attach the nuts (CC) onto the hook (C) and then
insert the hooks in the holes as shown.
□
Be sure the hooks (C) are pointing upwards for
installation, then hand-tighten the nuts (CC).
□
Securely tighten the nuts (CC) with a 14mm wrench
(not included). Be careful not to over tighten.
Installing the Shelf
□
Put the 4 shelf clips (E) into the slots on the interior
of the side cabinet as shown, installing two shelf clips (E)
on each side of the interior.
□
Be sure that all 4 shelf clips (E) are at the same level
before installing the shelf (D). Shelf can be installed at
desired level as long as the shelf clips are aligned
correctly.
A
AA
B
BB
D
E
Back
Side
www.
.com
1.800.561.8187
