Gearmore PTP180-P Скачать руководство пользователя страница 24

22

LIMITED WARRANTY

GEARMORE, INC., warrants each new Gearmore product to be free from defects in material and 
workmanship for a period of twelve (12) months from date of purchase to the original purchaser. 
This warranty shall not apply to implements or parts that have been subject to misuse, negligence, 
accident, or that have been altered in any way.

Our obligation shall be limited to repairing or replacement of any part, provided that such part is 
returned within thirty (30) days from date of failure to Gearmore through the dealer from whom 
the purchase was made, transportation charges prepaid.

This warranty shall not be interpreted to render us liable for injury or damages of any kind or nature, 
direct, consequential or contingent, to person or property. This warranty does not extend to loss 
of crops, loss because of delay in harvesting or any other expenses, for any other reasons.

Gearmore in no way warranties engines, tires, or other trade accessories, since these items are 
warranted separately by these respective manufacturers.

Gearmore reserves the right to make improvements in design or changes in specifi cation at any 
time, without incurring any obligations to owners or units previously sold.

GEARMORE, INC.

13477 Benson Ave.

Chino, CA 91710

Always refer to and heed machine operating warning decals on machine.

 

The serial number of this product is stored in our computer database, thus 

submitting a warranty registration card is not required.

 

 

                       CUSTOMER INFORMATION

NAME: _______________________________________________

PURCHASED FROM: __________________________________

DATE OF PURCHASE: _________________________________

MODEL NUMBER: ____________________________________

SERIAL NUMBER: ____________________________________ 

Содержание PTP180-P

























Отзывы: