ASSEMBLY INSTRUCTIONS
3
STEP 10:
Bolt 10 x 25 - Qty. 2, Bolt 10 x 80 - Qty. 1, Washer 10 x 20 - Qty. 6, Nut M10 - Qty. 2.
Install all lower tie rods, as shown in the photos without tightening them.
STEP 11:
Bolt 10 x 80 - Qty. 1, Washer 10 x 20 - Qty. 2, Self Lock Nut M10 - Qty. 1.
Secure the
tube to the tongue, as shown in the photo.
STEP 12:
Shimming Washer 56 x 70 x 0.5 - Qty. 2, Crowned Washer 56 x 80 x 10 - Qty. 1
.
Assemble the stainless steel disc, as per these photos.
STEP 11 STEP 12
STEP 13:
Bolt 6 x 16 - Qty. 2, Washer 6 x 12 - Qty. 2
. Fasten snap ring inside the hopper using
the above mentioned bolts and nuts.
STEP 14:
Pin 8 x4 0 - Qty. 1, Pin 5 x 40 - Qty. 1.
Fasten the entrainer, as shown in the photo.
STEP 13 STEP 14
