Gearmore GHF100, Руководство по эксплуатации, обслуживанию и запасным частям

Страница: 10 / 26

DRIVE BELT TENSION ADJUSTMENT
Page 8
1. Check belt tension before each use ( Fig. 8 ). The tension is correct when you can depress
one belt 1 cm (
3
/
8
") between the two pulleys. It is possible for you to insert a tool through
the belt cover ( Fig. 9 ), with shredder stopped, to check the tension.
2. To adjust the belt tension, loosen bolts 1, 2, 3 & 4 and locknut 6 ( Fig. 9 ). To adjust tension,
move bolt 5 . Do not forget to tighten all bolts after correct belt tension is achieved. If a belt
requires replacement, replace all other belts as well.