Gearmore ARENA-VATOR III AV3-4, Руководство по сборке/эксплуатации/комплектующим

Страница: 18 / 38

4.6 TRANSPORTING
TRANSPORT SAFETY
4.7 STORAGE
1. Make sure you are in compliance with all
local regulations regarding transporting
equipment on public roads and highways.
2. Make sure the SMV (Slow Moving Vehicle)
emblem and all the lights and re fl ectors that
are required by the local highway and trans-
port authorities are in place, are clean and
can be seen clearly by all overtaking and
oncoming tra
ffi c.
3. Do not allow anyone to ride on the Arena-
vatorIII or tractor during transport.
4. Do not exceed 20 mph (32 kph). Reduce
speed on rough roads and surfaces.
5. Use retainers on the mounting pins when
attaching.
6. Always use hazard fl ashers on the tractor
when transporting unless prohibited by law.
1. Store the unit in an area away from human
activity.
2. Do not permit children to play on or around
the stored machine.
3. Store the unit in a dry, level area. Support
the frame with planks if required.
STORAGE SAFETY
When transporting the machine, review and follow
these instructions:
1. Be sure all bystanders are clear of the machine.
2. Be sure that the machine is securely attached to
the tractor and all retainer pins are installed.
3. Be sure you have installed extra weights on the
front of the tractor if required.
4. Clean the SMV emblem, lights and re fl ectors
and be sure they are working.
5. Be sure you are in compliance with all applicable
lighting and marking regulations when trans-
porting. Check with your local authorities.
6. Be sure your machine can clearly be seen by
overtaking and oncoming traf fi c.
7. Keep to the right and yield the right-of-way to
allow faster traf fi c to pass. Drive on the road
shoulder if permitted by law.
8. Do not allow riders.
9. Always use hazard fl ashers on the tractor when
transporting unless prohibited by law.
After the season's use, the machine should be
thoroughly inspected and prepared for storage.
Repair or replace any worn or damaged compo-
nents to prevent any unnecessary down time at
the start of next season. To insure a long, trou-
ble free life, this procedure should be followed
when preparing the unit for storage:
1. Clear the area of bystanders, especially
small children.
2. Thoroughly wash the machine using a pres-
sure washer to remove all dirt, mud, debris
and residue.
3. Inspect the tines and pivot for damage or
entangled material. Repair or replace dam-
aged parts. Remove all entangled material.
4. Touch up all paint nicks and scratches to
prevent rusting.
5. Move to storage area.
6. Select an area that is dry, level and free of
debris.
7. Unhook from tractor.
8. If the machine cannot be placed inside,
cover with a waterproof tarpaulin and tie
securely in place.
9. Store the machine in an area away from hu-
man activity.
10. Do not allow children to play on or around
the stored machine.
16