6
gearmo.com/support
Windows Installation
RS-232
1. Put the driver CD in the CD ROM driver
2. Open the path: “CD ROM-driver\FTDI drivers\Setup.exe”, afterwards click next.
3. Click fi nish to complete the installation.
4. Open device manager to make sure that the driver was installed successfully.
5. You can now start to use the device.
Ethernet Port
1. Put the driver CD in the CD ROM driver
2. Open the path: “CD ROM-driver\realtek drivers\Setup.exe”, afterwards click next.
3. Click fi nish to complete the installation
4. Open device manager to make sure that the driver was installed successfully.
5. You can now start to use the device.
