Three magnets located at the
base of the lantern provide
for easy hands-free operation.
Magnetic Base
OPERATIONS
On/Off
To turn the lantern on, pull up
on the top part of the lantern
to expose the LED lights.
To turn the lantern off,
fully collapse the lantern.
Adjust the height of the
lantern to control the
amount of light emitted.
MAGNETS
Easily hang the lantern with
the foldaway hook located
at the base of the lantern.
Foldaway Hook &
Detachable Handles
OPTIONAL:
To facilitate ease
of hanging, the handles of
the lantern can be detached
and reattached.
CLOSE
OPEN
Remove the batteries if the lantern is not working properly. Failure to
do so may result in personal injury and damage to property.
WARNING
Magnets can dislodge or shatter when dropped from a height above 1
meter. Inspect the lantern and ensure magnets are secure before use.
Magnets may cause serious injury or death if swallowed - keep away
from children and pets.
WARNING
NOTE:
Most stainless steels are not magnetic.
DETACHABLE
HANDLES
FOLDAWAY
HOOK
AA Battery Installation
1
2
3
GETTING STARTED
Remove the battery compartment cap
(Fig. 1)
by
holding the lantern upside down and rotating the base
counterclockwise. The base will feel firm until it
releases and rotates open.
Insert 3 AA batteries
(Fig. 2)
following the correct
polarity (+,-) marked inside the battery compartment
(Fig. 3)
.
Replace and secure the battery compartment cap by
rotating it clockwise until it clicks firmly shut.
FIG. 1
FIG. 2
NOTE:
To prevent the lantern from accidentally turning on when
not in use, close the lantern completely and snap the handles
securely into the handle locks.
FIG. 3
Batteries can explode or leak and cause injury if installed backwards,
disassembled, charged, crushed, mixed with used or other battery
types, or exposed to fire or extreme temperatures. Replace all
batteries at the same time.
WARNING
MAGNETIC
BASE
(WITH 3x MAGNETS)
FOLDAWAY
HOOK
DETACHABLE
HANDLES
COB LED
BATTERY
COMPARTMENT
CAP
HANDLE
LOCKS
DETACHABLE
STORAGE
CAP
WARNING
Do not shine the light directly into anyone’s eyes or stare directly into
the LED. This product is not designed, intended, or recommended for
children or hazardous environments.
PARTS AND FEATURES