WARNING
:
To avoid eye injury, do not stare directly into the light beam or shine the
beam directly into anyone’s eyes. This product is not designed, intended, or
recommended for children or hazardous environments.
CAUTION:
The flashlight may become warm or hot after extended periods of use
at the highest setting. Select a lower setting when the flashlight is hot. This is
typical for high-powered flashlights and does not cause damage to the flashlight.
AA Battery Installation
1. Unscrew tail cap and remove battery holder.
2. Insert six (6) AA batteries following the correct polarity (+,-) marked on the
battery holder.
3. Insert the battery holder into the flashlight with the positive (+) end first.
On/Off
•
To turn the flashlight on, press down firmly on the red power button located on
the tail of the flashlight until you hear a click.
• To turn the flashlight off, press down firmly again until you hear a click.
Twist Zoom
1. Hold both ends of the flashlight; gently twist clockwise to extend and focus.
2. Twist the opposite direction for a broad dispersed light beam.
Switching Modes
• There are 3 different lighting modes: HIGH, MEDIUM, LOW
• To switch through the modes, gently press down on the red power button.
• The flashlight will switch to the next mode when turned off and on in quick
succession. It will reset to high mode after being off for more than 20 seconds.
GETTING STARTED
OPERATIONS
WARNING:
Always follow the battery manufacturer’s instructions as to the
proper usage, handling, storage, and disposal of batteries. Use only batteries
from a reputable manufacturer. Do not mix different brands or types of
batteries in the same flashlight. Replace all batteries at the same time. Failure
to follow safety instructions may result in personal injury and damage to
property.
POWERFUL
LED
POSITIVE NEGATIVE
LANYARD
TWIST ZOOM
HEAD
HIGH-GRADE
ALUMINUM BODY
ANTI-ROLL
DESIGN
RUBBER
O-RING
TAIL
CAP
POWER
BUTTON
AA BATTERY
HOLDER
+ –
+ –
+ –
HIGH
MEDIUM
LOW