GEARENCH PETOL DA1344, Руководство по эксплуатации

Страница: 6 / 22

4
Safe Practices and Procedures
Responsibility
"It is the responsibility of the employer to train the employee in the proper selection and
usage of tools, chains, etc., and to ensure that they are selected and used in that manner. In
many instances, injury results because it is assumed that anybody knows how to use common
hand tools. Observations and the record show that this is not the case. A part of every job
instruction program should therefore be detailed training in the proper use of hand tools (and
of all other special tools and equipment needed to accomplish the job)." - (Source: National
Safety Council)
"Employers are responsible for the safe condition of tools and equipment used by employees,
including tools and equipment which may be furnished by employees." - (Source: OSHA
1910.242A)
Replacement Parts
Use only PETOL™ replacement parts - no other parts are of comparable strength, quality and
interchangeability.
Safety
While we pride ourselves on the quality and dependability we build into GEARENCH™
tools and products, we caution users that it is only prudent to know and follow the simple
rules of safety when using our products, or anyone else's.
Always follow safe practices and procedures in accordance with the recommendations of
OSHA, The National Safety Council (NSC), The Hand Tools Institute (HTI), The National
Association of Chain Manufacturers (NACM), The International Association of Drilling
Contractors (IADC), Etc. All applicable Governmental rules, regulations or restrictions, now
in effect or which may be promulgated, take precedence over the suggestions in this
publication. The information in this publication is designed to supplement standard safe
practices and procedures, not in lieu of, or replacement thereof.
Safe Practices
(Source: The National Safety Council)
Failure to observe one or more of the following five safe practices accounts for most hand
and powered tool accidents:
1. ALWAYS WEAR SAFETY GOGGLES TO PROTECT EYES
2. SELECT THE RIGHT TOOL FOR THE JOB
3. KEEP TOOLS IN GOOD CONDITION
4. USE TOOLS CORRECTLY
5. KEEP TOOLS IN A SAFE PLACE