4
S
TORAGE TO
C
ART
C
ONFIGURATION
The cart is now in the Storage configuration. To put the cart in the Cart configuration, do the following:
1.
Rotate the handle from underneath the cart and rotate to a vertical position.
2.
Undo the velcro strap and wrap around one end brace for storage.
3.
Lift and raise each End Brace until it is perpendicular to the cart deck surface.
4.
The slots in the End Brace should engage with the Posts.
C
ART
U
SAGE
If the Gearboss TranSPORT cart is being pulled by hand, make sure to use enough people.
Use 2 or more people if any of the following conditions exist:
•
Heavy loads (over 250 lbs)
•
High loads (stacked above end frames or mesh wrap)
•
Rough or soft ground
•
Steep inclines.
Pulling a heavy load at high
speed can cause an crash that
may result in severe injury or
extensive damage to the cart.
!
CAUTION
Never exceed 10 miles per hour.
Trying to stop a heavy load may
cause a crash. Severe injury or
damage to the cart may result.
!
CAUTION
Never exceed 5 miles per hour
(a fast walk) if the load is more
than 500 lbs or if the ground is
rough. A runaway or overturned
cart may result in severe injury
or damage to the cart.
!
CAUTION
Pull the cart slowly if the load
is piled high, if turns are tight,
or if the route includes ramps
or inclines. An overturned cart
may result in severe injury or
damage to cart and load.
!
CAUTION
End Brace
Post
Positions
End Brace
Velcro
Strap
