INTRODUCTION
Thank you for purchasing the RedSub BA-100 100W Bass Amplifier Head.
To help you get the most out of your new product, please read this manual carefully.
INSTRUCTIONS
INPUT
– For connecting your bass guitar.
PASSIVE / ACTIVE SWITCH
– For selecting which type of bass guitar you have.
GAIN
– Controls the amount of bass guitar signal that goes into the amplifier.
CLIP LIGHT
– Indicates when the signal has peaked.
TONE
– Changes the tone of the amplifier, MIN boosts low end, MAX boost treble.
LOW
– Adjusts the bass frequencies of the amplifier.
MID LEVEL
– Adjusts the selected mid-range frequency of the amplifier.
MID FREQUENCY
– Selects which area of the mid-range is boosted, 0 is low mid and 10 is upper
mid-range.
HIGH
– Controls the treble frequencies of the amplifier.
PRESCENCE
– Adjusts the upper mid-range of the amplifier.
BLEND
– Blends the amount of FX signal coming from the effects loop.
MASTER
– Adjusts the overall output of the amplifier.
AUX IN
– Use this to receive connection from MP3 player, CD player, drum machine, etc.
HEADPHONES
– Headphone output for the amplifier.
POWER
– Turns the amplifier off or on.
PARALLEL OUTPUT
– 2x Mono ¼” Jack outputs, maximum output 120w @ 4 Ohms.
BALANCED OUT
– Sends out balanced signal from the amp via XLR.
EFFECTS LOOP RETURN
– Connects to the output of an effects unit.
EFFECTS LOOP SEND
– Connects to the input of an effects unit.
SPECIFICATIONS
OUTPUT POWER
– 100w
MAX OUTPUT
– 120w @ 4 Ohms
DIMENSIONS
– 45cm x 23cm x 20cm
WEIGHT
– 9kg
If you have any more questions about this product, please do not hesitate to contact the
Gear4music Customer Service Team on
+44 (0)330 365 4444 or [email protected]
