3
1 – Lay the bass drum on the floor, with the back of the drum
at the bottom (the bass drum leg mounts should be
furthest from the floor). Find the bass drum head which
has the Gear4music logo, then place 1x bass drum hoop
on top. The Gear4music logo should be aligned with the
cymbal and tom mounts so it is straight.
3 – Place the second drum head (without the logo) over the
drum. Place the drum hoop with round holes over the
drum, making sure the holes line up with the other hoop.
The additional piece of metal is for attaching the bass
drum pedal, it should be facing outwards and be directly
at the bottom of the drum.
2 – You’ll notice that one bass drum hoop has square holes
and the other has round holes with an additional piece
of metal attached to the hoop. Take the hoop with square
holes and place it over the resonant drum head. You are
about to place tension rods through these holes so make
sure they aren’t in line with the mounts attached to the
bass drum. Carefully turn the bass drum over, holding the
head and hoop in place.
4 – Place the square nuts into the square holes on the drum
hoop and start feeding the tension rods and washers
through the round holes on the other hoop. Screw
together using the drum key. Loosely attach all four
so that the hoops and drum heads remain in place.
Evenly tighten all the tension rods, being careful not to
overtighten the drum. Insert the bass drum legs into the
mounts and tighten, attach the bass drum pedal to the
piece of metal at the bottom of the hoop.
BASS DRUM ASSEMBLY
ITEMS REQUIRED:
1x Bass Drum (with hoops)
2x Bass Drum Heads
(one with Gear4music, one without)
1x Bass Drum Pedal and Beater
4x Bass Drum Tension Rods, Washers
and Nuts (packed together)
2x Bass Drum Legs
1x Drum Key
ASSEMBLY INSTRUCTIONS
Содержание CHILDREN’S DRUM KIT
Страница 1: ...CHILDREN S DRUMKIT SETUPGUIDE...
Страница 2: ...CHILDREN S 3 PIECE DRUM KIT...
