Gear4music Brooklyn DIY Guitar Kit, Быстрый старт

Страница: 8 / 11

Step 6
Put the Body (1) and Neck (2) together. Place the Neck Plate (12) with the rubber
Pad on the back of the Body (1) in line with the pilot holes, and attach with the 4 x
45mm screw. Place the Truss Rod Cover (14) in place, matching the holes with the
pilot holes, and screw in using the 3 x 14mm screws.
Attach the Strap Buttons (21) with their rubber washers to the pilot holes on the
base and arm of the body (1) using the 2 x 26mm screws. Screw the Back Plate (8) in
place using the remaining 13mm screws.