Gear4music BDK STARTER KIT, Руководство по установке

Страница: 8 / 10

FITTING TOM TOM DRUM & CRASH CYMBAL
BOOM ARM TO THE BASS DRUM
ITEMS REQUIRED:
1x Tom Tom Drum (10” x 8”)
1x Bass Drum (20” x 14”)
1x Crash Cymbal Boom Arm
2x Tom Tom Drum Arms
1. Take the tom drum arm and crash boom arm
and place them into the holes on top of the bass
drum. Tighten the wing nuts on the bass drum to
secure them in place.
2. Loosen the wingnut on the tom arm, and place
the tom on to the tom arm.
3. Adjust the angle of the tom arm to your desired
position then tighten the wing nuts to secure the
drum and tom arm.
4. Repeat the above steps for the crash cymbal
boom arm.
Note – Memory locks have been put in place
on the tom arms, which makes setup easier.
These can be adjusted if required using the
drum key.
9