6
Settings
Individual settings for
Timed Dry
cycle minutes (
Time
), dryness level (
Level
), and temperature (
Temp
) can be set from
the minimum (lowest in column) to maximum (highest in column) . In general, the higher up the column, the more
energy will be used .
Time
- Selection only for Timed cycles.
Each “setting” allows you to specify a lower (1 tap) or an upper (2 taps) time working your way from a
minimum 10 minute to a maximum 99 minute dry time (10, 20, 30, 40, . . . 80, 90, 99, 10 . . .)
Dryness Level
- Selection only used for Sensor cycles. Timed cycles run for the selected time.
More Dry
Use for heavy-duty or mixed type fabrics .
Dry
Use for a normal dryness level suitable for most loads . This is the preferred cycle for energy savings .
Less Dry
Use for lighter fabrics .
Damp
For leaving items partially damp .
Temperature
High
For regular to heavy cottons .
Medium
For synthetics, blends, delicates and items labeled permanent press .
Low
For delicates, synthetics and items labeled tumble dry low .
Extra Low
For delicates, synthetics and items labeled tumble dry low .
Operating instructions
E
Options
Delay Dry
As the
Delay Dry
button is repeatedly pressed, the delay time sets to from 1 to 9 hours, and back to clear (0) . After selecting
the delay time, press
Start
and the delay time will count down the time remaining until the cycle starts .
If the
Delay Dry
button is pressed for 3 seconds, it clears (regardless of the delay time) or terminates a delaying cycle .
Extended Tumble
Use this option to minimize the wrinkles in clothes . It provides 1 hour of no-heat tumbling after the clothes are dry . If you are
using the cycle
Volume
and you select the
Extended Tumble
option, a signal will sound at the end of the drying time and every
5 minutes during the
Extended Tumble
cycle . This will remind you that it is time to remove the clothes .
eDry
Available for
Bulky Items, Towels/Sheets, Mixed Loads, Cottons, Jeans, Delicates
and
Casuals/Easy Care
. When the
eDry
button is pressed, cycle settings change to reduce the total energy consumption of the selected sensor cycle .
NOTE:
Cycle
times will change when
eDry
is selected.
The
eDry
option will default to on for
Cottons
. For optimal energy savings, turn
eDry
on . For optimal drying times, turn
eDry
off .
NOTE:
Energy savings will vary across loads and cycles .
The
Efficiency Monitor
lights display the relative energy use of your selected cycle and options . They are provided as an
energy guide and range from Good (1 light) to Better (5 lights) . Cycle (time), dryness level, temperature, and additional tumble
options can increase or decrease your energy efficiency . Some special cycles will not provide a display .
More Options
Drum Light
The drum light will go on if the
Drum Light
button is pushed or the door is opened . It will stay on until the door is shut or the
Drum Light
or
Power
button is pushed .
Volume
Use the
Volume
button to change the volume of the end of cycle and control signals . Press the button until you reach the
desired volume (low-med-high) or off . The clothes should be removed when the beeper goes off so wrinkles do not set in .
NOTE:
• Remove garments promptly at the sound of signal . Place clothes on hangers so wrinkles will not set in .
• Use the
Volume
especially when drying fabrics like polyester, knits and permanent press . These fabrics should be removed
so wrinkles will not set in .
Control Lock
You can lock the controls to prevent any selections from being made . Or you can lock the controls after you have started a
cycle . Children cannot accidentally start the dryer by touching buttons with this option selected .
To lock the dryer controls,
press and hold the
Drum Light
and
Volume
buttons at the same time for 3 seconds . The Locked
Controls icon will light up when locked .
To unlock the dryer controls,
press and hold the
Drum Light
and
Volume
buttons at the same time for 3 seconds .
NOTE:
The
Power
button can still be used when the machine is locked.
F
G
Содержание pbx10w00y0
Страница 11: ...Notes GEAppliances ca 11 ...
