HOW TO
YOUR DRYER
reduce
the risk of fire, electric shock,
or injury to persons when using your appliance, read the
IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
OFF/
I
Check the Lint Filter
Clean the lint filter each time the dryer is used. Always be sure the
lint filter is in place. Don’t use the dryer without it. See Care and Cleaning section.
Sort and Load the Clothes
Good sorting for the dryer begins at the washer. Generally, if
clothes are sorted right for washing, they’re sorted right for drying.
See the How to Sort the Clothes section. If you do mix various types
of fabrics in your
set the controls for the lighter-weight fabrics
and remove when dry. Reset controls
the remaining heavier fabrics.
the
See
the
Controls Setting Guide.
Selections.
Push a button to select the proper heat for your load.
I
used
with cycles indicated
●
I
Automatic
Drying
Automatic
Perm. Press and
Selections
Knits
Cottons
High Heat
●
Perm. Press
Medium Heat
●
●
Heat
I
I
Fluff
Heat
6
Timed
Cycles
●
●
●
●
Cycle Selector.
Turn the Cycle Selector to the desired
setting.
The selector may be turned in either direction.
Extra Care Feature
(Operates
with the Automatic Perm.
Press and Knits cycles).
Turn the control knob to ON if desired. To
minimize wrinkle setting in clothes, the Extra
Care cycle provides approximately 15 minutes
of no-heat tumbling after the clothes are dry.
Use End-Of-Cycle Signal. Signal
sound at
5-minute intervals to remind you to remove
the clothes.
End-of Cycle Signal.
Set this signal, if desired, to remind you to
remove clothes from the dryer when the cycle
ends. See the End-of Cycle
section at right.
Start Button.
Press the Push to Start button to start the dryer.
(Opening the
door during operation stops the
dryer. To restart, close the door and press the
Push to Start button).