Residual dangers on the valve and measures
Danger
Cause
Measure
Risk of injury
Danger presented by moving or
sharp-edged parts
The operator must exercise caution and prudence.
For all work:
•
Wear suitable work clothing.
•
Never operate the machine if the cover panels are not
correctly fitted.
•
Never open the cover panels during the operation.
•
Never reach into openings.
As a precautionary measure, wear personal protective equipment
in the vicinity of the valve:
•
Protective gloves
•
Safety shoes
Environmental damage
Operating materials with
properties which are harmful to
the environment
For all work:
•
Collect lubricants in suitable containers.
•
Dispose of lubricants in accordance with the pertinent
regulations.
2.9
Danger zones
Please observe the following notes:
Fig.4
•
In the event of malfunctions, shut down the valve (disconnect from the power
and air supply) and secure it against being used.
•
Never reach into the valve housing (1) when the valve is switching. Fingers
can be crushed or cut off.
•
If the valve is installed in hanging installation position, there is the risk that the
valve insert including drive falls out of the housing. Therefore secure the valve
prior to undoing the hinged ring (14) against falling with a suitable lifting
device. Ensure that you always wear safety shoes.
Safety
Danger zones
430BAL013059EN_7
16
24.03.2022
Содержание VARIVENT FRS
Страница 65: ...14 Dimension sheet Valve FRS Fig 31 Dimension sheet Valve FRS 430BAL013059EN_7 24 03 2022 65...
Страница 69: ...Appendix 430BAL013059EN_7 24 03 2022 69...
Страница 70: ......