GEA Hilge CONTRA I ADAPTA, Руководство по эксплуатации

Страница: 18 / 96

3.2 Description
The pump is a end suction, single-stage centrifugal pump in system block design.
All wetted parts are based on the “hygienic design” guidelines. The material
grade 1.4404 or 1.4435 Fe ≤ 1% and the respective execution standard are
carried out according to the order and, if required, certified in writing
3.2.1 Standard version applications
The standard version of the pumps is used in the following areas:
– Breweries (beer, wort, mash, yeast, etc.)
– Dairies (milk, milk mixes, cheese production, etc.)
–
Soft drinks (fruit juice, lemonade, mineral water, etc.)
– Wine and sparkling wine production
– Distilleries (mash, distillates, etc.)
–
Food production (marinades, pickle, cooking oil, etc.)
– Cleaning systems (CIP)
3.2.2 Hygienic design applications
Due to the consistent hygienic design and the use of pore and porosity-free
materials, the pump is ideally suited for use in the following areas:
– pharmaceutical industry
– medical technology
– in biotechnology process plants
Special applications arise in the area of ultrapure water delivery/WFI, as well as
in equipment for the production of parenterals and infusion solutions according to
FDA.
3.3 Pump name
GEA Hilge pump name
GEA Hilge CONTRA I / 3 ADAPTA 40/40 3 2
Pump name
Size / number
of stages
Design type Nominal width
Output
[kW]
Number of
poles
3.4 Type plate
GEA Hilge
Niederlassung der GEA Tuchenhagen GmbH
Hilgestrasse - D - 55294 Bodenheim
Pump-Type:
Ser.-No.:
Q:
H:
n:
P:
TAG No.:
YOM: Made in Germany
Fig.2: Type plate GEA Hilge
Description
Description
BA.10A.ADY.001.GB_1
18 20.07.2018