GEA DairyRobot R9500 Скачать руководство пользователя страница 76

Страница: 76 / 100

Maintenance

Inspections and preventive maintenance

7821-9001-005

01. October 2019

76 / 100

8.3.3

Replacing the chain and sprockets

The chain comes correctly pre-tensioned from the factory.

It is not necessary to re-tension the chain because of the very slight wear.

As a rule the chain will not have to be changed for several years.

Warning!

Danger from automatic start

The conveyor chain can start to move when work is being carried out.
There is a risk of crushing and electric shock.
► Disconnect the cable from the power supply before starting the work.

● Undo the four screws holding the

sampling equipment in the lid.

● Turn the sampling equipment out of the

lid so that the chain is on top.

● Loosen the threaded pin on the

sprocket (drive) with a spanner.

● Place a spanner on the square of the

chain tensioner and loosen the chain.

Содержание DairyRobot R9500





































































































Результаты поиска

Содержание DairyRobot R9500

Отзывы:

GEA DairyRobot R9500, Руководство по эксплуатации, Страница: 76 / 100

Результаты поиска

Содержание DairyRobot R9500

Отзывы: