GEA Bock HGZX7/1860-4 R410A, Руководство по сборке

Страница: 2 / 42

2
D
GB
F
E
09726-09.2013-DGbF
1 Safety 3
1.1 Identification of safety instructions
1.2 Qualifications required of personnel
1.3 General safety instructions
1.4 Intended use
2 Product description 6
2.1 Short description standard design
2.2 Main and functional parts
2.3 Short description optional design
2.4 Name plate
2.5 Type key
3 Areas of application 9
3.1 Refrigerants
3.2 Oil charge
3.3 Limits of application
3.4 Subcooling temperature
4 Description of functions 12
4.1 Two-stage refrigeration circuit with liquid subcooler
5 Compressor assembly 14
5.1 Setting up
5.2 Installation of the liquid subcooler system (standard design)
5.3 Installation example, liquid subcooler with accessories
5.4 Factory-installed liquid subcooler system (optional design)
5.5 Pipe connections
5.6 Pipes
5.7 Laying suction and pressure lines
5.8 Operating the shut-off valves
5.9 Operating mode of the lockable service connections
6 Electrical connection 21
6.1 Information for contactor and motor contactor selection
6.2 Circuit diagram for part-winding start
6.3 Standard motor, design for direct or partial winding start
6.4 Electronic trigger unit MP 10
6.5 Connecting of the trigger unit MP 10
6.6 Function test of the trigger unit MP 10
6.7 Oil sump heater (accessories)
7 Commissioning 28
7.1 Preparations for start-up
7.2 Pressure strength test
7.3 Leak test
7.4 Evacuation
7.5 Refrigerant charge
7.6 Start-up
7.7 Avoiding liquit sluggings
8 Maintenance 31
8.1 Preparation
8.2 Work to be carried out
8.3 Spare part recommendation
8.4 Replacing the valve plates
8.5 Extract from the lubricants table
8.6 Decommissioning
8.7 Accessories
9 Technical data 34
10 Dimensions and connections 35
11 Declaration of conformity and installation 38
12 Service 40
About these instructions
Read these instructions before assembly and before using the compressor. This will avoid misunder -
standings and prevent damage. Improper assembly and use of the compressor can result in serious
or fatal injury.
Observe the safety instructions contained in these instructions.
These instructions must be passed onto the end customer along with the unit in which the compres -
sor is installed.
GEA Bock GmbH
72636 Frickenhausen
GEA Bock GmbH
Benzstraße 7
72636 Frickenhausen
Germany
Tel49 7022 9454 0
Fax
+49 7022 9454 137
bock@gea.com
www.bock.de
Manufacturer
Contact