GEA Aseptomag AMV, Руководство по эксплуатации

Страница: 51 / 60

Fig.41: Pulling off actuator components
®
Actuator PA35 PV H is disassembled.
10.11.2 Assembling actuator PA35 PV H
Hint!
Pay attention to the following points when assembling the actuator:
• Replace all visible seals.
• Thoroughly clean and check the interior cylinder contact surfaces, O-ring
grooves, piston rod and piston disc.
• When changing the seals, do not damage the seal groove.
•
Use only replacement seals from the seal set indicated in the list of
spare parts.
• Grease all seals and the associated contact surfaces with the food-
grade lubricant PARALIQ GTE 703.
Tools required:
•
Hex socket key
• Assembly tool for PA35
Carry out the following steps:
1. Assemble the actuator in the reverse order of disassembly, see
Section 10.11.1, Page 49.
Maintenance
Disassembling and assembling actuator PA35 PV H
430BAL013317EN_1
11.03.2019 51