GEA ARIETE, Инструкция по эксплуатации и техническому обслуживанию

Страница: 353 / 556

VLT
®
5000 Series
■
Mains supply 3 x 380 - 500 V
According to international requirements VLT type 5001 5002 5003 5004
High overload torque (160 %):
Output current I
VLT,N
[A] (380-440 V) 2.2 2.8 4.1 5.6
I
VLT, MAX
(60 s) [A] (380-440
V)
3.5 4.5 6.5 9
I
VLT,N
[A] (441-500 V) 1.9 2.6 3.4 4.8
I
VLT, MAX
(60 s) [A] (441-500
V)
3 4.2 5.5 7.7
Output S
VLT,N
[kVA] (380-440 V) 1.7 2.1 3.1 4.3
S
VLT,N
[kVA] (441-500 V) 1.6 2.3 2.9 4.2
Typical shaft output P
VLT,N
[kW] 0.75 1.1 1.5 2.2
Typical shaft output P
VLT,N
[HP] 1 1.5 2 3
Max. cable cross-section to motor,
brake and loadsharing [mm
2
]/[AWG]
2 )
4/10 4/10 4/10 4/10
Rated input current I
L,N
[A] (380 V) 2.3 2.6 3.8 5.3
I
L,N
[A] (460 V) 1.9 2.5 3.4 4.8
Max. cable cross-section, power [mm
2
]/[AWG]
2 )
4/10 4/10 4/10 4/10
Max. pre-fuses [-]/UL
1 )
[A] 16/6 16/6 16/10 16/10
Efficiency
3 )
0.96 0.96 0.96 0.96
Weight IP 20 EB [kg] 8 8 8 8.5
Weight IP 54 [kg] 11.5 11.5 11.5 12
Power loss at max.
load.
[W] 55 67 92 110
Enclosure
IP 20/
IP 54
IP 20/
IP 54
IP 20/
IP 54
IP 20/
IP 54
1. If UL/cUL is to be complied with, pre-fuses type Bussmann KTS-R or Ferraz Shawmut type ATMR
class CC must be used.
If UL/cUL is not to be complied with, we
recommend using the above-mentioned Bussmann fuse or
type gG fuse.
Not following the recommendation may result in unnecessary damage of the drive in case of malfunc-
tion. Fuses must be designed for protection in a circuit capable of supplying a maximum of 100000 A
rms
(symmetrical), 500 V maximum.
2. American Wire Gauge.
3. Measured using 30 m screened motor cables at rated load and rated frequency.
MG.51.A1.02 - VLT is a registered Danfoss trade mark
19
T
echnical
data