GE ZVB30SH/BH/WH Скачать руководство пользователя страница 3

ZVB30SH/BH/WH – GE Monogram 30" Telescopic Downdraft Vents

Specification Created 10/03 

130658

Venting Options

The downdraft vent is shipped with the  

discharge outlet pointing straight down 

and can be changed to a left- or right-side 

discharge. For even more flexibility, the entire 

blower and mounting plate can be adjusted 

3-1/2" to the left or right sides.

Electrical and Gas Locations

Plan the placement of the electrical outlet 

and gas (if used) carefully. Gas or electrical 

outlets cannot be located on the back wall of 

the cabinet because they may interfere with 

the downdraft plenum. 

•  Install a standard electrical outlet within 

reach of the vent’s two-foot-long power 

cord. Locate the outlet inside the cabinet  

on the right side wall. 

•  If the vent is installed in combination with a 

Monogram

®

 gas cooktop, it may operate  

from the same 120V standard duplex outlet.

•  If the vent is installed in combination with a 

Monogram electric cooktop, the vent must 

operate from a separate 120V outlet.

682Dia49

Discharge Down

(As Supplied)

682Dia50

Discharge Left

682Dia51

Discharge Right

34" for 36" Models

28-1/2" for 30" Models

29-1/2"

Electrical

Outlet

12" Above

Cabinet Floor

Do Not Locate Gas or Electrical

Connections Within Shaded Area

682Dia47

For answers to your Monogram,

®

 GE Profile

 or  

GE

®

 appliance questions, visit our website at  

GEAppliances.com or call GE Answer Center

®

  

service, 800.626.2000.

Listed by  

Underwriters  

Laboratories

R

Содержание ZVB30SH/BH/WH

Страница 1: ...vidual dimension drawings for the combined vent and Monogram cooktop installation Before you begin you must 1 Review countertop dimension illustrations to be sure you will have enough flat countertop surface depth 2 Check to be sure that the total countertop depth required including minimum cutout to front edge depth allows enough space for a backsplash 3 Review the cabinet illustration Check to be...

Страница 2: ...ller Panel Maintain Cutout Clearances to Front Edge as Specified 605Dia160 Cover Panel Base Sink End Panel Countertop Overhang per Cooktop Clearances Must be Maintained 605Dia161 DOWNDRAFT VENT 1 7 8 Trim Add a Bullnose Trim or Decorative Molding to Increase Countertop Depth and to Maintain Required Clearance From Front Edge Optional Accessories JXRB67 Accessory for indoor remote location of the b...

Страница 3: ...rical outlet within reach of the vent s two foot long power cord Locate the outlet inside the cabinet on the right side wall If the vent is installed in combination with a Monogram gas cooktop it may operate from the same 120V standard duplex outlet If the vent is installed in combination with a Monogram electric cooktop the vent must operate from a separate 120V outlet 682Dia49 Discharge Down As ...

Страница 4: ...ounted control Variable speed fan with slide control Raises to 8 1 2 over cooktop surface Retracts when not in use Removable grease filters 3 1 4 x 10 rectangular duct Optional remote blower capabilities Stainless steel vent body Minimum 6 round duct capabilities Model ZVB30SHSS Stainless steel shown Model ZVB30WHWW White on white Model ZVB30BHBB Black on black 682Dia23 ...

Отзывы: