OVEN CONTROL, CLOCK AND TIMER
Clock
To Set the Clock
The clock must be set before the
controls for the oven will work.
The time of day clock cannot be
changed during Delay Start. (It can
be changed during a regular bake or
broil operation.)
1. Press the CLOCK pad.
2. Depending on which model you
have, you will set the clock by
pressing either the number pads
or + or – pads. Press the number
pads the same way you read
them. For example, to set
12:34, press the number pads 1,
2, 3 and 4 in that order.
If number pads are not pressed
within one minute after you
press the CLOCK pad, the
display reverts to the original
setting. If this happens, press the
CLOCK pad and reenter the
time of day.
3. Press the START pad.
This enters the time
and starts the clock.
To check the time of day when
the display is showing other
information, simply press the
CLOCK pad. The time of day
shows until another pad is pressed.
Timer
You may program the timer to time cooking or other
household activities for up to 9 hours and 59 minutes.
The timer counts down in minutes, 1 minute at a time,
until the last 60 seconds are reached, then the control
will beep one time. The seconds will not be displayed
until the last minute is reached.
When the timer reaches “ :00,” the control will beep
3 times followed by one beep every 6 seconds until
the KITCHEN TIMER ON/OFF pad is pressed.
The 6 second tone can be canceled by following
the steps in the Special Features of Your Oven Control
section under Tones at the End of a Timed Cycle.
How to Set the Timer
1. Press the KITCHEN TIMER ON/OFF pad.
2. Press the + or – or number pads to set the time.
For example, to enter 2 hours and 45 minutes,
touch 2, 4 and 5 in that order.
If you make a mistake, press the KITCHEN
TIMER ON/OFF pad and begin again.
3. Press the START pad. After pressing the
START pad, “SET” disappears; this tells
you the time is counting down, although
the display does not change until one
minute has passed.
4. When time is up, the oven control signals
until you press the KITCHEN TIMER
ON/OFF pad. Display then shows the
time of day.
NOTE: The minute timer is independent of all the
other functions and it does not control the oven.
The CLEAR/OFF pad does not affect the timer.
Power Failure
If a flashing time is in the display, you have
experienced a power failure. Reset the clock.
To reset the clock, press the CLOCK pad. Enter the
correct time of day by pressing the + or – or the
appropriate number pads. Press the START pad.
12
