GE WWA8480BAL, Инструкция по использованию и уходу, Страница: 20 / 24

THE PROBLEM SOLVER
(continued)
PROBLEM
SNAGS, HOLES,
TEARS, RIPS OR
EXCESSIVE WEAR
HEAVILY SOILED
AREAS such as
WASHER WON’T
WATER
TEMPERATURE
IS
POSSIBLE CAUSE
●
Pins on garments or sharp objects left in pockets. Check to make sure all such
objects are removed. Also check wash tub.
●
Snaps, hooks, sharp buttons, belt buckles, zippers. Fasten hooks, zippers and
buttons. Remove sharp buttons and belt buckles. This is especially important
in washing knits which snag easily. Turn knits inside out.
●
Holes with random square shapes with yellow discoloration may be caused by
improper use of chlorine bleach. Use only correct amount of bleach, using Bleach
Dispenser, (if washer is so equipped). Never add undiluted bleach to wash tub or
allow clothes to come into contact with undiluted bleach. Do not wipe up bleach
spills with clothes.
●
Chemicals such as hair bleach, dye, permanent wave solutions, battery acids
and toilet bowl cleaners may cause fabric holes. Rinse all towels and other
articles that came in contact with these chemicals before putting them in wash.
Do not contaminate clothing articles with these chemicals.
●
Small, unnoticed tears may enlarge during washing process. Check garments
before washing and mend rips and tears.
●
As Permanent Press garments age, they may show fraying at collars and cuffs.
This is normal due to weakening of fibers by the Permanent Press process. It is
not caused by washer. You can slow this process by washing small Permanent
Press loads with a Large Water
Do not wash heavy items such as
with Permanent Press. Remove collar stays, when possible.
●
Roughness or burrs on agitator may cause rips or tears. Check agitator and file
rough spots if necessary.
●
May be caused by the use of Regular Cycles for delicate articles. Use Permanent
Press Cycle. Refer to Garment Manufacturer’s Care Labels.
●
Garments weakened by age, sun or atmosphere. This is inevitable and is not caused by
●
Too loads, or too little water. Load washer only with number of items that
will move Select correct water level.
Pretreat with liquid detergent. Use Extra Cleaning cycle (if your washer is so
See Operating Instruction Leaflet.
Make sure cord is plugged into outlet.
●
Make sure both hot and cold faucets are turned on.
●
Make sure controls are set and Selector knob is pulled out to ON position,
●
Make sure lid is closed. Washer will fill but will not spin or with lid open.
●
Check house fuses or circuit breakers. If another appliance is sharing the
electrical outlet, remove it. Washer should have separate outlet.
●
Make sure temperature selector controls are correctly set.
●
Make sure hot and cold faucets are turned on and
regulated correctly.
●
Make sure hoses are connected to correct faucets . . .
hot to hot, cold to cold.
o
20