GE WLXR1020T, Руководство пользователя, Страница: 18 / 24

18
If Something Goes Wrong
Problem Possible Causes What to Do
Improper loads • Avoid mixing heavy items (like work
clothes) with light items (like blouses).
• Separate permanent press from
other laundry.
• Try a fabric softener (like Downy brand).
Overloading or incorrect • Load your washer so clothes have enough
water level room to move freely.
Incorrect wash and dry cycles • Match Cycle selection to the type of fabric
you are washing (especially for permanent
press loads).
Repeated washing in water • Wash in warm or cold water with plenty
that is too hot of detergent.
Wrinkling
Pins, snaps, hooks, sharp • Fasten snaps, hooks, buttons, and zippers.
buttons, belt buckles,
• Remove loose items like pins, objects in
zippers, and sharp objects
pockets and sharp buttons.
left in pockets
• Turn knits (which snag easily) inside out.
Undiluted chlorine bleach • Check bleach package instructions for
proper amount.
• Never add undiluted bleach to wash or
allow clothes to come in contact with
undiluted bleach.
Small tears or holes • Repair tears and holes before washing.
present before wash
Chemicals like hair bleach, • Rinse items that may have chemicals
hair dye, permanent wave on them before washing.
solution and toilet bowl cleaners
Permanent press items • While this is not caused by the washer,
naturally fray (especially you can slow the fraying process by
collars and cuffs) making sure not to overload the washer.
Load your washer so clothes have enough
room to move freely.
• Avoid washing heavy items (like towels)
with permanent press items.
Snags, Holes, Tears,
Rips, or Excessive
Wear