Safety Instructions
Operating Instructions
Care and Cleaning
Tr
oubleshooting T
ips
Consumer Support
11
ge.com
Tones at the End of a Timed Cycle
At the end of a timed cycle, 3 short beeps will
sound followed by one beep every 6 seconds until
the
CLEAR/OFF
pad is touched. This continuous
6 second beep may be canceled.
To cancel the 6 second beep:
Touch the
BAKE
and
BROIL HI/LO
pads at the same time for 3 seconds
until the display shows
SF.
Touch the
BROIL HI/LO
pad. The
display shows
CON BEEP
(continuous
beep). Touch the
BROIL HI/LO
pad
again. The display shows
BEEP.
(This cancels the one beep
every 6 seconds.)
Touch the
START
pad.
NOTE:
This feature is not available for the
lower oven.
12 Hour, 24 Hour or Clock Black-Out
Your control is set to use a 12 hour clock.
If you would prefer to have a 24 hour
military time clock or black-out the clock
display, follow the steps below.
Touch the
BAKE
and
BROIL HI/LO
pads at the same time for 3 seconds
until the display shows
SF.
Touch the
TIMER/CLOCK
pad once.
The display will show
12 hr.
If this
is the choice you want touch the
START
pad.
Touch the
TIMER/CLOCK
pad again
to change to the 24 hour military
time clock. The display will show
24
hr.
If this is the choice you want
touch the
START
pad.
Touch the
TIMER/CLOCK
pad again
to black-out the clock display.
The display will show
OFF.
If this is the choice you want
touch the
START
pad.
NOTE:
If the clock is in the black-out mode you
will not be able to use the Delay Start function.
