HOW TO OPERATE YOUR CLOTHES WASHER
WARNING—To reduce the risk of fire, electric shock, or injury to persons when using your
appliance, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance.
OFF
\\
wad/Rinse
❑
NORMAL
NORMAL
NORMAL
GENTLE
NORMAL
LIGHT SOIL
.
●
O
Sorting and Loading
●
Sort clothes carefully by fabric
type, weight, color and amount
of soil, according to instructions
in How to Sort Clothes section.
●
Remove the
Filter-Flo
and Mini-
Basket tub.
The underside
of the
is a
good place to put the
while
loading or unloading clothes.
Do not use the Mini-Basket
tub
when washing regular loads.
You’ 11 find complete details on
how and when to use How to
Use the Mini-Basket Tub section.
●
Add measured amount of
detergent. See Detergents, Other
Additives section for information
on detergents and other laundry
additives.
●
Load clothes into wash basket,
being careful not to overload.
Clothes should be below retaining
ring. See How to Load Your
Washer section for more
information.
●
Position the Filter-Flo pan on
the agitator. Lint
collect in
the pan for easy removal when
the wash is finished.
Do not use the
Filter-Flo pan
as a wash basket.
Do not put
any items to be washed in the
Filter-Flo pan.
●
See How to Use Bleach
Dispenser section
for information
on the Bleach Dispenser.
●
See How to Use Fabric Softener
Dispenser section for more
information on the Fabric
Softener Dispenser.
●
information on bleaches
and fabric softeners, see Other
Laundry Products section.
●
Close the lid. Washer will
but not agitate or spin with the
lid open.
Setting the Controls
Use the Controls Setting Guide to help you make
the proper selections.
Select
Speed.
Select Water Level.
SMALL: Washer is less than 1/3 full of clothes.
MEDIUM: Between
and 1/2 full.
LARGE: Between
and 2/3 full.
o
EXTRA LARGE: Over 2/3 full.
MINI-BASKET: Not used for regular loads. See How
to Use the Mini-Basket Tub section.
If you want to increase water level after you’ve
made a selection, turn knob to RESET and
select new level.
Select Extra Rinse, if desired. Turning control
to ON will provide a second deep rinse in the
Regular Cycle. If no Extra Rinse is desired,
turn control to OFF.
Select Wash/Rinse Temperature. Cold rinse will
be automatically provided with use of Permanent
Press and Knits Cycles.
Push Cycle Selector knob in and turn clockwise
to your selected wash setting.
Pull Cycle Selector knob
START ,
out to start the washer.
If you wish to change
setting after washer
has started,
/
s
STOP
Selector
in to-stop the washer and reset to the
new position. Setting
be changed at any time.
5
