GE
RAFT
V
OLUSON
™ P8 / V
OLUSON
™ P6
DIRECTION 5723243, R
EVISION
6
DRAFT (M
AY
23, 2018)
B
ASIC
S
ERVICE
M
ANUAL
3-76
Section 3-13 - Network Configuration
NOTE:
This example shows fictional numbers!
NOTE:
For further details refer to the Voluson P-Series Basic User Manual.
3-13-2
Wireless Network Configuration
NOTE:
To configure the Voluson P-Series system to work with WLAN, the hospital’s network administrator has
to provide the required information.
3-13-2-1
Connecting to the WLAN
1.) Connect the Wireless Network adapter as described in
2.) Press the “Utilities” key on the control console.
3.) In the “Utilities” menu press the
Setup
button to invoke the setup desktop on the screen.
4.) On the right side of the screen select
Connectivity
and then click the
Device Setup
tab.
5.) Click the
WLAN Configuration
Section Figure 3-76 on page 3-75
Figure 3-77 Internet Protocol (TCP/IP)
1
You can get IP and DNS settings assigned automatically, if your network supports this capability.
2
If fixed IP address is required, ask your network administrator for the appropriate settings.
Type in:
- IP address
- Subnet mask
- Default gateway
- DNS server
