GE VKSR2100T, Руководство пользователя

Страница: 15 / 23

16
Problem Possible Causes What to Do
Washer is unplugged •
Make sure cord is plugged securely into a
working outlet.
Water supply is turned off •
Turn both hot and cold faucets fully on.
Controls are not set properly •
Check controls and make sure Cycle knob
is pulled out to ON position.
Lid is open •
Close lid and pull Cycle knob out to ON
position.
Circuit breaker/fuse is •
Check house circuit breakers/fuses. Replace
tripped/blown
fuses or reset breaker. Washer should have
separate outlet.
Washer won’t operate
Drain hose is kinked or
•
Straighten drain hose and make sure
improperly connected
washer is not sitting on it.
•
Top of drain outlet should be less than 8 ft.
above floor.
Water won’t drain
Fill hoses or drain hose is •
Make sure hose connections are tight at faucets
improperly connected
and make sure end of drain hose is correctly
inserted in and secured to drain facility.
Household drain may •
Check household plumbing. You may need
be clogged
to call a plumber.
Water leaks
Control is not set properly •
Check water temperature control and adjust.
Water supply is turned off •
Turn both hot and cold faucets fully on and
or improperly connected
make sure hoses are connected to correct
faucets.
Water valve screens are •
Turn off the water source and remove the
stopped up
water connection hoses from the upper back
of the washer. Use a brush or toothpick to
clean the screens in the machine. Reconnect
the hoses and turn the water back on.
House water heater is not set •
Make sure house water heater is delivering
properly
water at 120°F.-150°F. (48°C.-65°C.).
Water temperature
is incorrect
If Something Goes Wrong
Before you call for service