GE Vivid S60N, Базовое руководство по обслуживанию

Страница: 357 / 478

D
IRECTION
FR091521, R
EVISION
1 V
IVID
S60N/V
IVID
S70N B
ASIC
S
ERVICE
M
ANUAL
Chapter 8 - Replacement Procedures 8-127
P R E L I M I N A R Y
8-5-16 TRx32 Boards Replacement Procedure
8-5-16-1 Tools
Appropriate Phillips screwdriver.
8-5-16-2 Time Required
15 minutes
8-5-16-3 Preparations
Shut down the Vivid™ S60/Vivid™ S70 ultrasound unit, as described in Power Shut Down on page 4 - 7 .
8-5-16-4 TRX32 Boards Removal Procedure
1) Remove the following covers: left side, right side, DVD, front .
2) Open and remove the Front End door assembly and place it on a stable surface:
3) Loosen the 2 screws that secure the metal cover of the TRX32 Box, and open the cover.
( Figure 8-153 below ).
CAUTION
When performing these procedures, take precautions to avoid damage of
electrostatic-sensitive components. Always have the ESD wrist strap
connected either to the DIB chassis or to the GND plug at the rear of the
scanner, and to your hand.
If a battery is present, first remove the battery as it contains stored energy.
Refer to
Battery Removal Procedure on page 8 - 145 .
FRU Part #
Refer to
Table 9-15
on page 9-14
.
• Air Inlet (Left Side) Cover Removal Procedure on page 8 - 7
• Right Side Cover Removal Procedure on page 8 - 10
• DVD Cover Removal Procedure on page 8 - 11
• Front Cover Removal Procedure on page 8 - 16
• Front End Door Assembly Opening and Removal Procedure on page 8 - 83
Figure 8-153 Opening the Metal Cover of the TRX32 Box