GE Vivid E9, Руководство по обслуживанию

Страница: 309 / 802

GE H
EALTHCARE
D
IRECTION
GA091568, R
EVISION
5 VIVID E9 S
ERVICE
M
ANUAL
Chapter 6 - Service adjustments 6 - 17
6-7-3-2 XY Lock Adjustment for Lock and Brake Mechanism (cont’d)
• Before reassembling the Lock Assembly , make sure the Park Lock Nut ( 2 ) and the Park Lock
Lever ( 3 ) are in the position illustrated in Figure 6-17 .
6-7-4 Using the Park Lock Properly
It is important to inform a customer of the following if they are experiencing problems with the XY park
lock function.
Be sure to:
• Apply the brakes. The locking mechanism will not engage if the device can move when trying to
park the console.
• Push the release button and gently guide the console into the locked position until the lock is
engaged.
• Not apply any weight on the console or lean on it. If the console is not in the normal resting position,
the lock will not engage when trying to park it.
6-7-5 Adjusting the Z mechanism
There are no adjustments for the Operator Panel’s vertical movement.
Related information:
4-2-3-6 "Moving the Top Console up or down when Power is OFF" on page 4-13
Section 6-8
Adjust time-out for DICOM servers
If you are experiencing problems with slow responses from DICOM servers, increase the time-out in the
DICOM server properties dialog.
Problems with slow responses may result in images being re-sent automatically and low transfer rates.
The retry settings can be used to make jobs retry on bad networks. There is no need to set retries for
mobile (off-line) use.
Figure 6-17 Adjustment Set