GE VAT20 Скачать руководство пользователя | Manualshive

Страница: 3 / 49

background image

3

1. Foreword

To fully employ all functions of the inverter, and to ensure the safety of users, please read through
this operating manual in detail. Should you have any further query, please feel free to contact your
local distributor or customer service of GE.

Precaution

The inverter is a power electronic device, for safety reason, please take special care for
paragraphs with “WARNING” or “CAUTION” symbol. They are important safety precautions to be
aware of while transporting, installation, operating or examining the inverter. Please following
these precaution to ensure your safety.

WARNING

Personnel injury may be resulted by improper operation.

CAUTION

The inverter or mechanical system may be damaged by improper operation.

WARNING

●

Do not touch the PCB or components on the PCB right after turning off the power before the

charging indicator went off.

●

Do not attempt to wire circuitry while power is on. Do not attempt to examine the components

and signals on the PCB while the inverter operating.

●

Do not attempt to disassemble or modify internal circuitry, wiring, or components of the

inverter.

●

The grounding terminal of the inverter must be grounded properly with 200V class type III

standard.

●

This is a product of the restricted sales distribution class according to EN 61800-3.

In a domestic environment this product may cause radio interference in which case the user

may be required to take adequate measures.

CAUTION

●

Do not attempt to proceed dielectric strength test to internal components of the inverter.

There are sensitive semiconductor-devices vulnerable to high voltage in the inverter.

●

Do not connect the output terminals: T1(U), T2(V), and T3(W) to AC power outlet.

●

The CMOS IC on the primary PCB of the inverter is vulnerable to static electrical charges.

Do not contact the primary PCB of the inverter.

2. Examination before installation

Every GE Power Controls inverter has been fully tested and examined before shipment.
Please carry out following examination procedures after unpacking your inverter.

●

Check to see the model number of the inverter. It should be the one that you ordered.

●

Check to see if there is any damage during the transportation. Do not connect the inverter

to the power supply if there is any sign of damage.

Report to regional sale representative if you find any abnormal condition as mentioned above.

«
1
2
3
4
5
...
»

Содержание VAT20


















































Отзывы:

Нет отзывов

Похожие инструкции для VAT20

imageRUNNER ADVANCE C9075S PRO

Бренд: Canon Страницы: 20

Бренд: K&K Страницы: 6

Бренд: Yudian Страницы: 26

vlt soft starter mcd 500

Бренд: Danfoss Страницы: 95

Бренд: Danfoss Страницы: 12

Бренд: Danfoss Страницы: 33

Бренд: Danfoss Страницы: 59

Бренд: Danfoss Страницы: 16

VLT AQUA Drive FC 200

Бренд: Danfoss Страницы: 91

Бренд: Danfoss Страницы: 2

Бренд: Danfoss Страницы: 100

Бренд: Danfoss Страницы: 82

Бренд: Danfoss Страницы: 18

Бренд: Danfoss Страницы: 12

OPTYMA Plus OP-LPQM

Бренд: Danfoss Страницы: 8

Бренд: Gardner Denver Страницы: 22

Бренд: B&G Страницы: 2

Бренд: jbc Страницы: 44

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды